---
What Is the Bosch E22 Water Tap Error?
The Bosch E22 error code appears on the dishwasher's display panel when the appliance detects an issue related to water intake. This error is specifically associated with the water tap or water inlet system, hence the name "water tap error." When triggered, the dishwasher may halt its operation, refuse to fill with water, or display this error message to alert the user.
Key Symptoms of Bosch E22 Water Tap Error
- Dishwasher fails to fill with water at the start of a cycle
- Error code E22 appears on the display
- Water inlet flow is blocked or insufficient
- Unusual noises from the water inlet area
- Water leakage or drips from the water inlet hose
---
Common Causes of Bosch E22 Water Tap Error
Understanding the root causes of the E22 error is crucial for effective troubleshooting. Here are the most frequent reasons why this error occurs:
1. Water Supply Issues
- Closed or Kinked Water Valve: The water supply valve may be turned off or partially closed.
- Low Water Pressure: Insufficient water pressure from the household supply can prevent proper filling.
- Frozen or Blocked Water Line: In cold environments, water lines can freeze, obstructing flow.
2. Faulty Water Inlet Valve
- Defective Valve: The water inlet valve itself may be malfunctioning or stuck closed.
- Electrical Issues: Faulty wiring or relay problems can prevent the valve from opening.
3. Clogged or Blocked Water Filter
- Debris Accumulation: Sediment or debris can clog the inlet filter, restricting water flow.
4. Faulty Water Level Sensor
- Sensor Malfunction: An incorrect reading from the water level sensor can trigger the error.
5. Kinked or Damaged Inlet Hose
- Hose Bends or Leaks: A kinked, damaged, or leaking hose can reduce water intake.
---
How to Troubleshoot and Fix the Bosch E22 Water Tap Error
Addressing the Bosch E22 error involves a systematic approach. Below are step-by-step instructions to diagnose and resolve the problem.
Step 1: Check the Water Supply
a. Ensure the Water Valve Is Fully Open
- Locate the water supply valve connected to the dishwasher.
- Turn the valve fully clockwise to open it.
- Confirm that water is flowing freely.
b. Inspect for Kinks or Damage in the Inlet Hose
- Examine the inlet hose traveling from the water supply to the dishwasher.
- Straighten any kinks or bends that may restrict flow.
- Look for leaks or cracks, and replace if necessary.
c. Verify Household Water Pressure
- Ensure household water pressure is adequate (ideally between 20-120 psi).
- If pressure is low, consider consulting a plumber.
Step 2: Inspect the Water Filter and Inlet Screen
a. Turn off the Dishwasher and Water Supply
- Disconnect the power and turn off the water supply.
b. Detach the Inlet Hose
- Loosen the hose connection at the back of the dishwasher.
c. Clean the Filter Screen
- Locate the small filter inside the inlet valve or hose.
- Remove and clean it with warm water and a soft brush.
- Reinstall the filter securely.
Step 3: Examine the Water Inlet Valve
a. Test the Valve for Functionality
- Use a multimeter to check for electrical continuity if you're comfortable with electrical diagnostics.
- Replace the inlet valve if it shows signs of failure or no continuity.
b. Replace the Valve if Faulty
- Purchase a compatible water inlet valve for your Bosch model.
- Follow manufacturer instructions or consult a professional for replacement.
Step 4: Check the Water Level Sensor
a. Inspect for Damage or Malfunction
- Access the sensor (usually located inside the dishwasher).
- Clean or replace if faulty.
Step 5: Reset the Dishwasher
- Turn off the dishwasher and unplug it from the power source.
- Wait for a few minutes.
- Plug it back in and turn on the dishwasher.
- Run a short cycle to see if the error persists.
---
Additional Tips for Resolving Bosch E22 Water Tap Error
- Ensure Proper Installation: Verify that all hoses and connections are correctly installed and tightened.
- Avoid Using Excessive Detergent: Overuse can cause foaming and blockages.
- Keep the Area Clear: Ensure there’s no debris around the inlet valve or filter.
- Regular Maintenance: Clean filters and check water hoses periodically to prevent recurring issues.
---
When to Contact Professional Repair Services
While many E22 errors can be fixed with basic troubleshooting, some situations require professional intervention:
- Inability to access or replace internal components safely
- Persistent error after troubleshooting steps
- Signs of electrical faults or wiring issues
- Water leaks or damage
Contact an authorized Bosch service technician for comprehensive diagnostics and repairs.
---
Preventative Measures to Avoid Bosch E22 Water Tap Error
Prevention is always better than cure. Implement these practices to minimize the risk of encountering the E22 error:
- Regularly inspect and clean water inlet filters
- Ensure household water pressure remains stable
- Avoid kinking or twisting inlet hoses
- Keep the area around the dishwasher dry and free of debris
- Use the correct type and amount of detergent
---
Conclusion
The Bosch E22 water tap error can be inconvenient, but with a clear understanding of its causes and proper troubleshooting steps, most issues can be resolved quickly. Start by verifying the water supply, inspecting filters, and ensuring the inlet valve functions correctly. Regular maintenance and cautious operation can significantly reduce the likelihood of this error recurring. Should the problem persist despite your efforts, professional repair services are recommended to ensure safe and effective resolution.
By following this comprehensive guide, you can restore your Bosch dishwasher to optimal performance and enjoy clean dishes without interruption.
Frequently Asked Questions
What does the Bosch E22 water tap error indicate?
The Bosch E22 error typically indicates a problem with the water inlet system, such as a blocked or closed water tap, kinked hose, or water supply issue preventing the dishwasher from filling properly.
How can I fix the Bosch E22 water tap error on my dishwasher?
To resolve the E22 error, check that the water tap is fully open, inspect the inlet hose for kinks or blockages, and ensure the filter is clean. If the issue persists, the inlet valve might need replacement or further professional inspection.
Is the Bosch E22 error related to water pressure problems?
Yes, insufficient water pressure can trigger the E22 error. Ensure your household water pressure meets the dishwasher's requirements and that there are no issues with your home's plumbing system.
Can I reset the Bosch E22 error myself?
In many cases, resetting the dishwasher by turning it off and unplugging it for a few minutes can clear the error. However, if the problem persists, it's advisable to check the water supply and inlet valve or contact a technician.
When should I contact a professional for the Bosch E22 error?
If you've checked the water supply, cleaned the inlet filter, and the error still appears, or if you suspect a faulty inlet valve or internal component, it's best to contact a qualified appliance technician for diagnosis and repair.
