---
Understanding the Scotts EdgeGuard Spreader Settings Chart
What is the Scotts EdgeGuard Spreader?
The Scotts EdgeGuard spreader is a popular broadcast spreader designed for even distribution of fertilizers, grass seed, and other lawn care products. Its unique edge guard feature helps prevent material waste and ensures precise application along flower beds, driveways, and sidewalks.
Purpose of the Settings Chart
The settings chart provides specific adjustment numbers for the spreader, correlating to different materials and application rates. These settings control the size of the opening through which the material flows, directly impacting the coverage rate and application uniformity.
Components of the Settings Chart
The chart typically includes:
- Material Type (fertilizer, seed, lime, etc.)
- Spreader Setting Number (1 to 10+)
- Coverage Rate (square feet per pound)
- Application Rate Recommendations
---
Interpreting the Scotts EdgeGuard Spreader Settings Chart
Material-Specific Settings
Different materials require different settings. For example:
- Fine seed: lower settings for precision
- Fertilizer: moderate settings to ensure even distribution
- Lime: higher settings due to larger particle size
Application Rate and Coverage
Understanding your lawn size and the recommended application rate helps determine the appropriate spreader setting:
- Calculate the total amount of material needed based on lawn size
- Use the chart to find the setting that provides the desired coverage per pound or bag
Adjusting the Spread Rate
Most charts will include settings for:
- Light application (e.g., overseeding)
- Moderate application (e.g., regular fertilization)
- Heavy application (e.g., corrective treatments)
---
How to Use the Scotts EdgeGuard Spreader Settings Chart
Step-by-Step Adjustment Process
1. Identify the Material: Determine the type of material to spread.
2. Consult the Chart: Find the recommended setting number for that material.
3. Prepare the Spreader: Ensure the spreader is clean and in working condition.
4. Adjust the Setting:
- Turn the adjustment dial or lever to the specified number.
- For some models, this involves aligning a numbered dial with a marker.
5. Test the Setting:
- Conduct a small test on a non-visible area.
- Check coverage and adjust as needed.
6. Calculate the Application Rate:
- Based on your lawn size, determine how much material you'll need.
- Adjust settings if you're aiming for a different coverage rate than the default.
Tips for Accurate Application
- Always wear protective gear when handling chemicals.
- Spread when the lawn is dry for best results.
- Avoid spreading in windy conditions to prevent drift.
- Re-calibrate if you're switching between different materials or bag sizes.
---
Common Scotts EdgeGuard Spreader Settings Chart for Different Materials
Below is a general overview of typical settings for common materials. Always refer to your specific spreader model’s manual and the product label for precise instructions.
Fertilizer (Granular)
- Light application: Setting 3-4
- Normal application: Setting 5-7
- Heavy application: Setting 8-10
Grass Seed
- Fine seed: Setting 2-3
- Coarser seed: Setting 4-5
Lime or Soil Amendments
- Setting 8-10 (due to larger particle size)
Pelleted or Coated Products
- Settings vary based on particle size; typically in the 4-6 range.
---
Factors Influencing Spreaders Settings and Performance
Material Particle Size
Larger particles require higher settings to flow properly through the spreader.
Application Rate Preferences
Adjust settings based on whether you want a light, moderate, or heavy coverage.
Environmental Conditions
Windy or damp conditions can affect distribution; consider adjusting settings or timing applications accordingly.
Spread Pattern and Overlap
Ensure overlapping passes slightly to avoid missed spots and uneven coverage.
---
Maintaining and Calibrating Your Scotts EdgeGuard Spreader
Routine Maintenance
- Clean the spreader after each use to prevent clogs.
- Lubricate moving parts periodically.
- Check for damaged components and replace as necessary.
Calibration Tips
- Use a scale to measure the amount of material dispensed during a test run.
- Adjust the setting until the desired coverage per square foot is achieved.
- Record your calibration settings for future use.
When to Recalibrate
- After switching material types.
- When spreading significantly different quantities.
- If you notice uneven distribution or clumping.
---
Additional Tips for Optimizing Your Spreading Results
- Read Product Labels Carefully: Follow manufacturer recommendations for application rates.
- Plan Your Spreading Path: Walk in straight lines and overlap slightly for uniform coverage.
- Spread in Optimal Conditions: Choose days with calm weather and dry conditions.
- Use the Correct Spread Rate for Your Lawn Size: Avoid over-application, which can damage turf, or under-application, which reduces effectiveness.
- Store Your Spreader Properly: Keep it in a dry place and periodically inspect for damage.
---
Conclusion
The Scotts EdgeGuard spreader settings chart is an indispensable tool for achieving precise and efficient lawn and garden care. By understanding how to interpret and apply the settings appropriately, you can maximize the effectiveness of fertilizers, seeds, and other products while minimizing waste and environmental impact. Regular maintenance, calibration, and following the manufacturer’s guidelines will ensure your spreader continues to perform optimally season after season. Whether you're overseeding your lawn or applying lawn amendments, a thorough understanding of the spreader settings chart empowers you to achieve professional-quality results at home.
---
Remember: Always refer to your specific Scotts EdgeGuard model’s manual and the product label for the most accurate instructions. Proper setup and calibration make all the difference in creating a lush, healthy lawn.
Frequently Asked Questions
What is the purpose of the Scotts Edgeguard Spreader settings chart?
The chart provides recommended settings for adjusting the spreader to achieve optimal fertilizer or seed distribution based on terrain and material type.
How can I use the Scotts Edgeguard Spreader settings chart to improve application accuracy?
By matching your spreader model and material type to the chart's recommended settings, you can ensure even coverage and prevent over- or under-application.
Are the settings on the Scotts Edgeguard Spreader chart suitable for all types of fertilizers?
The chart covers common fertilizers, but for specialized or granular products, refer to the manufacturer's guidelines or consult the product label for specific settings.
How often should I consult the Scotts Edgeguard Spreader settings chart during lawn care?
Use the chart each time you change material type or spreader model, and periodically check settings to ensure consistent application, especially after maintenance or adjustments.
Can I customize the Scotts Edgeguard Spreader settings beyond the chart recommendations?
Yes, but it's recommended to start with the chart's settings and make small adjustments based on your observations to achieve the desired coverage.
Where can I find the latest Scotts Edgeguard Spreader settings chart?
You can find the latest chart in the user manual, on the Scotts website, or through authorized lawn care retailers and customer support resources.
