The Braun Silk Epil Xelle 5395 is an advanced epilator designed to provide smooth, hair-free skin with minimal discomfort. As with any sophisticated grooming device, understanding how to operate and maintain the Braun Silk Epil Xelle 5395 is essential for achieving optimal results and ensuring the longevity of the device. This comprehensive user manual aims to guide users through setup, usage, maintenance, and troubleshooting, enabling a confident and effective hair removal experience.
---
Introduction to the Braun Silk Epil Xelle 5395
The Braun Silk Epil Xelle 5395 is part of Braun’s renowned line of epilators, combining cutting-edge technology with user-friendly features. It is suitable for both beginners and experienced users seeking efficient hair removal solutions at home. The device is designed to remove hair from the root, providing longer-lasting smoothness compared to shaving or depilatory creams.
Features of the Braun Silk Epil Xelle 5395 include:
- Wide head for faster hair removal
- SoftLift Tips to lift flat-lying hair
- Multiple speed settings
- Wet & dry operation for use in bath or shower
- Built-in massage rollers to reduce discomfort
- Corded and cordless functionality
Understanding these features is key to maximizing the device’s potential and tailoring the hair removal process to your comfort level.
---
Getting Started with Your Braun Silk Epil Xelle 5395
Unboxing and Contents
When you open the packaging, ensure all components are present:
- Braun Silk Epil Xelle 5395 Epilator
- Charging/Power cord
- Cleaning brush
- Protective cap
- User manual and safety instructions
- Additional attachments (if included)
Charging and Power Supply
The Braun Silk Epil Xelle 5395 is designed for both corded and cordless use. To maximize convenience:
- Charge the device fully before first use, which typically takes about 1 hour.
- Connect the device to a power outlet using the provided cord.
- The charging indicator light will signal when the device is fully charged.
Note: The device can be used cordlessly after charging, offering freedom of movement during epilation.
Preparation Before Use
For optimal results:
- Exfoliate the skin a day before to remove dead skin cells and reduce ingrown hairs.
- Ensure the skin is clean, dry, and free of oils, lotions, or creams.
- If using in water, ensure the device is waterproof and suitable for wet use.
---
Operating the Braun Silk Epil Xelle 5395
Powering On and Off
- To turn on the device, press the power button located on the handle.
- Select the desired speed setting:
- Low speed: suitable for sensitive areas
- High speed: for faster hair removal or coarser hair
- To power off, press the same button again.
Using the Epilator Effectively
To achieve smooth skin with minimal discomfort:
1. Hold the device at a 90-degree angle to the skin.
2. Gently press the epilator against your skin.
3. Move the device slowly in the direction of hair growth.
4. Do not press too hard; let the epilator do the work.
5. Cover the area systematically, overlapping slightly to ensure complete removal.
Recommended Areas for Use:
- Legs
- Arms
- Underarms
- Bikini line
- Face (if suitable and with appropriate attachments)
---
Special Features and Attachments
Massage Rollers
The built-in massage rollers help to stimulate the skin and reduce discomfort during epilation. Use this feature during your session for a more comfortable experience.
Smartlight
The device is equipped with a bright LED light that illuminates the area being epilated, ensuring no hair is missed.
Attachments and Accessories
Depending on the model, additional attachments may include:
- Sensitive area cap
- Shaving head
- Trimming comb
- Facial cap
Utilize these attachments for specific areas or for alternative hair removal methods.
---
Post-Epilation Care
Cleaning and Maintenance
Proper cleaning extends the life of your epilator:
1. Turn off and unplug the device.
2. Remove the epilation head.
3. Use the provided cleaning brush to remove hair and debris.
4. Rinse washable parts under warm water if waterproof (check manual for confirmation).
5. Let parts dry completely before reassembling.
Skin Care After Epilation
Post-epilation skin care is crucial:
- Apply a soothing lotion or aloe vera gel to calm the skin.
- Avoid sun exposure immediately after epilation.
- Exfoliate regularly to prevent ingrown hairs.
Storage
Store the device in a dry, cool place, preferably in a protective pouch or case to prevent dust and damage.
---
Maintenance and Troubleshooting
Regular Maintenance
- Clean the epilation head after each use.
- Replace the epilation head as recommended by Braun, generally after 100 hours of use.
- Check for damage or wear and replace parts as necessary.
Troubleshooting Common Issues
- Device does not turn on: Ensure it is charged or plugged in properly.
- Less effective hair removal: Check for hair length; ideally, hair should be 0.5-1 mm long.
- Unusual noise or vibration: Clean the device thoroughly; contact customer service if problem persists.
- Device overheating: Allow it to cool down before next use.
---
Safety Precautions
- Do not use the epilator on irritated, broken, or sunburned skin.
- Avoid using near eyes or mucous membranes.
- Keep away from water unless the device is waterproof.
- Keep out of reach of children.
- Do not attempt to repair the device yourself; contact authorized service centers.
---
FAQs about Braun Silk Epil Xelle 5395
Q1: Can I use the epilator in the shower?
A: Yes, if the device is waterproof and designed for wet use, you can use it in the shower or bath.
Q2: How often should I epilate?
A: Initially, every 2-3 weeks until hair growth reduces. Once accustomed, maintenance can be every 4-6 weeks.
Q3: Is the device suitable for sensitive skin?
A: Yes, use the lower speed and sensitive attachments, and always perform a patch test first.
Q4: How do I prevent ingrown hairs?
A: Regular exfoliation, proper skin hydration, and avoiding hair removal on irritated skin help prevent ingrowns.
---
Conclusion
The Braun Silk Epil Xelle 5395 is a reliable and effective tool for at-home hair removal, offering multiple features to cater to various skin types and preferences. Proper understanding of its operation, maintenance, and safety guidelines can significantly enhance your epilation experience, leading to smoother skin and increased confidence. Always refer to the official user manual for detailed instructions specific to your device, and do not hesitate to contact Braun customer support for additional assistance. With consistent use and proper care, the Braun Silk Epil Xelle 5395 can become an integral part of your personal grooming routine.
Frequently Asked Questions
How do I turn on and off the Braun Silk Epil Xelle 5395?
To turn on the Braun Silk Epil Xelle 5395, press the power button located on the device. To turn it off, press the same button again until the device powers down.
What are the different speed settings available on the Braun Silk Epil Xelle 5395?
The Braun Silk Epil Xelle 5395 offers multiple speed settings, usually controlled via a switch or button, allowing you to choose the desired intensity for comfortable hair removal. Refer to the user manual for specific speed options and their uses.
How do I clean and maintain the Braun Silk Epil Xelle 5395?
After use, detach the epilation head and rinse it under warm water to remove hair residues. Use the provided cleaning brush to remove debris from the device and ensure the device is dry before storage. Consult the manual for detailed cleaning instructions.
Can I use the Braun Silk Epil Xelle 5395 in the shower or bath?
The Braun Silk Epil Xelle 5395 is generally designed for dry use only. Do not use it in the shower or bath unless specified as waterproof in the user manual. Always check the manual for water resistance details.
What safety precautions should I follow when using the Braun Silk Epil Xelle 5395?
Ensure your skin is clean and dry before use. Do not use the device on irritated or broken skin. Keep the device away from water and do not use while charging. Read the user manual thoroughly for all safety instructions.
How do I replace the epilation head on the Braun Silk Epil Xelle 5395?
To replace the epilation head, press the release button or gently pull the current head off, then align and click the new head into place. Refer to the user manual for detailed steps and compatibility information.
