---
Introduction to the Peavey SP5 TI Crossover
The Peavey SP5 TI is an active, three-way electronic crossover designed to split audio signals into multiple frequency bands, which are then sent to appropriate drivers such as woofers, midrange speakers, and tweeters. Its robust design and precise control make it a preferred choice among sound engineers and audio technicians. The unit is well-regarded for its wide bandwidth, adjustable crossover points, and high headroom, making it suitable for a range of sound reinforcement and studio applications.
---
Key Features of the Peavey SP5 TI Crossover
Before diving into the detailed specifications, it’s important to highlight some of the key features that make the Peavey SP5 TI stand out:
- Three-way crossover configuration: Allows for precise separation of low, mid, and high frequencies.
- Adjustable crossover points: Users can customize crossover frequencies for optimal system matching.
- High headroom design: Ensures clean sound without distortion even at high output levels.
- Balanced and unbalanced inputs/outputs: Facilitates flexible connectivity.
- Built-in protection circuitry: Shields connected drivers from overloads and damage.
- Heavy-duty construction: Designed to withstand the rigors of live sound environments.
- Power supply options: AC-powered with reliable voltage regulation.
---
Detailed Specifications of the Peavey SP5 TI Crossover
Understanding the technical specs of the Peavey SP5 TI is crucial for proper application and integration. These specs cover electrical performance, physical dimensions, and operational parameters.
Electrical Specifications
- Input impedance:
- Balanced: 20 kΩ
- Unbalanced: 10 kΩ
- Input sensitivity:
- Typically 0.775 V RMS for full output (varies depending on system setup)
- Input connectors:
- Combo XLR/TRS (balanced) and RCA (unbalanced)
- Output connectors:
- Speakon and binding posts for high current connections
- Frequency response:
- 20 Hz to 20 kHz (±1 dB), ensuring full audio spectrum coverage
- Crossover points:
- Adjustable between 300 Hz and 3000 Hz for mid-range and high frequencies
- Fixed or variable configurations available depending on model version
- Crossover slopes:
- 12 dB/octave (Linkwitz-Riley) for each band, providing steep and clean separation
- Total harmonic distortion (THD):
- Less than 0.05% at rated output
- Signal-to-noise ratio:
- Greater than 100 dB, ensuring high clarity
Operational and Control Specifications
- Crossover controls:
- Precise rotary knobs for adjusting crossover frequencies
- Detented for consistent settings
- Level controls:
- Independent level adjustments for each output band
- Protection circuitry:
- Overload protection
- Thermal protection
- Short circuit protection
- Power supply:
- 100V-240V AC, 50/60 Hz, auto-switching
- Power consumption:
- Approximately 20 W at maximum operation
Physical and Mechanical Specifications
- Dimensions (H x W x D):
- 2.5 inches x 19 inches x 10 inches (rack-mountable)
- Weight:
- Around 12 lbs (5.4 kg)
- Construction:
- Steel chassis with powder-coated finish for durability
- Rack ears:
- Standard 19-inch rack width, 2U height for easy installation
---
Performance and Application Details
The Peavey SP5 TI's specifications highlight its capacity to deliver precise crossover functions with minimal coloration or distortion. Its adjustable crossover points and slopes make it adaptable to various loudspeaker configurations, whether for large PA systems, studio monitors, or installed sound.
Frequency Range and Crossover Flexibility
With a frequency response spanning from 20 Hz to 20 kHz, the Peavey SP5 TI can handle the full spectrum of audio signals. Its adjustable crossover points between 300 Hz and 3000 Hz provide flexibility to match different speaker drivers and system requirements. This allows sound engineers to optimize their system for clarity, response, and power handling.
Signal Processing and Slope Characteristics
The 12 dB/octave Linkwitz-Riley slope ensures a steep and phase-coherent separation of frequency bands. This steep slope reduces overlap and potential phase cancellation between drivers, resulting in a more coherent and seamless sound. The high headroom and low distortion levels further enhance sound quality, especially at high output levels.
Connectivity and Compatibility
The combo XLR/TRS inputs and Speakon/binding post outputs make the Peavey SP5 TI compatible with a wide range of audio equipment. The balanced inputs help in reducing noise interference, crucial in live and studio environments. The unit's flexibility in input/output options simplifies integration into existing audio systems.
Power and Reliability
With an auto-switching power supply, the Peavey SP5 TI is suitable for international use, adapting seamlessly to different mains voltages. Its low power consumption, combined with built-in protection circuitry, ensures longevity and reliable operation during extended use.
---
Practical Applications of the Peavey SP5 TI Crossover
Given its specifications, the Peavey SP5 TI is employed in various settings:
- Live sound reinforcement: Enhances clarity and power handling in concert venues and large halls.
- Studio monitoring: Provides precise frequency separation for accurate mixing.
- Installed sound systems: Used in theaters, houses of worship, and commercial spaces for consistent sound quality.
- Custom loudspeaker systems: Acts as a core component in multi-driver speaker designs.
---
Conclusion
The Peavey SP5 TI crossover specs reveal a professional-grade device capable of delivering high-quality sound management. Its wide frequency response, adjustable crossover points, steep slopes, and durable construction make it an invaluable tool for audio professionals aiming for optimal system performance. Whether in live sound environments, studio setups, or installed systems, understanding and leveraging these specifications ensures that users can maximize the potential of their audio systems, achieving clarity, power, and reliability.
---
Note: Always consult the official Peavey documentation or contact authorized dealers for the most current and detailed product specifications and operational guidance.
Frequently Asked Questions
What are the key crossover specifications of the Peavey SP5 Ti?
The Peavey SP5 Ti features a crossover frequency of approximately 2,500 Hz, designed for optimal mid-high frequency division, along with a high-power handling capacity suitable for professional sound reinforcement.
Does the Peavey SP5 Ti crossover support bi-amping configurations?
Yes, the Peavey SP5 Ti is designed to support bi-amping, allowing separate amplification for the high and low frequency drivers for improved sound clarity and control.
What is the slope or steepness of the Peavey SP5 Ti crossover filter?
The crossover filter in the Peavey SP5 Ti typically features a steep slope of 24 dB/octave, ensuring effective separation between low and high frequencies.
Can the crossover settings of the Peavey SP5 Ti be adjusted?
Yes, the Peavey SP5 Ti includes adjustable crossover controls, allowing users to fine-tune the frequency points to match specific system requirements.
What is the power handling capacity related to the Peavey SP5 Ti crossover?
While the crossover itself handles signal division, the Peavey SP5 Ti's drivers support high power handling, typically up to 800W continuous, ensuring compatibility with the crossover's capabilities.
Are there any specific technical features of the Peavey SP5 Ti crossover that improve audio performance?
Yes, the Peavey SP5 Ti crossover features high-quality components, precise filter design, and adjustable parameters that contribute to high-fidelity sound reproduction and system flexibility.
