Kenmore Dryer 11066712694

Understanding the Kenmore Dryer 11066712694: An In-Depth Guide

Kenmore Dryer 11066712694 is a popular model among homeowners seeking reliable and efficient laundry solutions. Known for its durability and advanced features, this dryer has garnered a significant user base. Whether you're considering purchasing this model or troubleshooting an issue, understanding its features, common problems, and maintenance tips can help you maximize its performance and lifespan.

Overview of the Kenmore Dryer 11066712694

Design and Features

The Kenmore Dryer 11066712694 is a front-loading electric dryer designed to deliver optimal drying performance. It features a spacious drum capacity, allowing users to dry large loads efficiently. The model often includes advanced features such as sensor drying, multiple cycle options, and energy-efficient modes.

• Capacity: Typically around 7.0 cubic feet, suitable for large families.


• Cycles: Various drying cycles including Normal, Heavy Duty, Delicates, and Quick Dry.


• Sensor Technology: Moisture sensors help prevent over-drying and save energy.


• Control Panel: Digital controls with a user-friendly interface.


• Additional Features: Wrinkle care, signal at end of cycle, and vent cleaning indicators.

Technical Specifications

Understanding the technical specifications can help in troubleshooting and maintenance. The typical specifications include:

1. Voltage: 240V


2. Amperage: 30A


3. Dimensions: Approx. 27 inches wide, 36 inches high, and 30 inches deep


4. Weight: Around 125 pounds


5. Energy Consumption: Designed to meet energy efficiency standards

Common Issues with the Kenmore Dryer 11066712694

Despite its reliability, users may encounter certain problems over time. Recognizing these issues early can prevent further damage and costly repairs.

1. Dryer Not Turning On

This is a frequent concern that can stem from various causes:

• Power supply issues – check the circuit breaker and power outlet.


• Door latch problems – the dryer won't start if the door isn't securely closed.


• Faulty control board or timer – may require replacement.

2. Dryer Not Heating

Heating issues can be caused by:

• Blown thermal fuse – a common safety feature that trips if the dryer overheats.


• Heating element failure – may need to be replaced.


• Thermostat malfunction – affecting temperature regulation.


• Blocked venting – restricting airflow and causing overheating protection to activate.

3. Drum Not Spinning

When the drum doesn't turn, consider:

• Broken belt – often the culprit in mechanical failure.


• Faulty motor – requiring professional diagnosis.


• Idler pulley or drum rollers worn out – needing replacement.

4. Noisy Operation

Unusual noises can indicate:

• Worn drum rollers or bearings.


• Foreign objects caught in the drum or blower wheel.


• Loose or damaged drive belt.

Maintenance Tips for the Kenmore Dryer 11066712694

Proper maintenance extends the lifespan of your dryer and maintains its efficiency.

1. Regular Cleaning

Cleaning the lint filter after every load is essential. Additionally:

• Clean the venting system periodically to prevent lint buildup, which can cause overheating and fire hazards.


• Wipe down the control panel and exterior surfaces to keep the appliance looking new.

2. Inspecting Components

Routine inspections can detect issues early:

1. Check the door latch for wear and proper closure.


2. Inspect the drive belt for cracks or fraying.


3. Test thermal fuses and thermostats for continuity.

3. Professional Servicing

For complex repairs such as replacing the heating element or motor, always seek qualified technicians. Regular professional check-ups can help identify potential problems before they escalate.

Troubleshooting Common Problems

Dryer Not Starting

• Ensure the dryer is plugged in and the circuit breaker is on.


• Verify the door switch is functioning correctly.


• Check for blown thermal fuse or faulty timer.

Dryer Not Drying Properly

• Clean the lint filter and venting system.


• Use the sensor drying cycle for better moisture detection.


• Ensure the heating element is operational.

Dryer Stops Mid-Cycle

• Overheating safety feature may have tripped; check thermal fuse.


• Inspect for blockages in the venting system.


• Ensure the control board and sensors are functioning properly.

Replacing Parts on the Kenmore Dryer 11066712694

Understanding how to replace common parts can be beneficial for DIY enthusiasts.

1. Replacing the Heating Element

1. Unplug the dryer and access the rear panel.


2. Remove the screws holding the panel and locate the heating element.


3. Disconnect the wiring harness and remove the faulty element.


4. Install the new element and reassemble the panel.

2. Replacing the Drive Belt

1. Open the dryer door and remove the lint filter.


2. Remove the front panel or kick panel as per model specifications.


3. Locate and remove the belt from the drum and motor pulley.


4. Install the new belt, ensuring proper routing.


5. Reassemble and test the dryer.

3. Replacing the Thermostat or Fuse

Always disconnect power before performing electrical replacements. Use a multimeter to verify continuity before installing new parts.

Conclusion: Maximizing the Performance of Your Kenmore Dryer 11066712694

The Kenmore Dryer 11066712694 combines advanced technology with user-friendly features, making it a reliable choice for many households. Regular maintenance, prompt troubleshooting, and understanding its features can help ensure it operates efficiently for years to come. Always consult your user manual for specific instructions related to your model, and don't hesitate to seek professional help for complex repairs. Proper care will preserve the value and functionality of your appliance, ensuring your laundry tasks are completed smoothly and effectively.

Frequently Asked Questions

What are common issues with the Kenmore Dryer 11066712694 not heating?

Common issues include a faulty heating element, blown thermal fuse, or a malfunctioning thermostat. Checking these components can help identify the cause of the lack of heat.

How can I troubleshoot if my Kenmore Dryer 11066712694 is not starting?

Ensure the dryer is plugged in, the door is fully closed, and the cycle selector is properly set. Additionally, check the circuit breaker and inspect the start switch for faults.

What is the best way to clean the lint filter on the Kenmore Dryer 11066712694?

Remove the lint filter and clear out any lint buildup with your hands or a soft brush. Regular cleaning improves airflow and drying efficiency, reducing the risk of overheating.

Why does my Kenmore Dryer 11066712694 take longer than usual to dry clothes?

Possible reasons include a clogged vent, a malfunctioning moisture sensor, or a worn-out heating element. Cleaning the vent and inspecting these parts can help restore proper drying times.

How do I replace the drum belt on the Kenmore Dryer 11066712694?

Unplug the dryer, remove the front or rear panel as needed, then release tension on the old belt and loop the new belt around the drum and motor pulley. Follow the manufacturer's guide for detailed steps.

Can I reset my Kenmore Dryer 11066712694 to resolve error codes?

Yes, unplug the dryer for a few minutes to reset the control board, then plug it back in. If error codes persist, consult the user manual for specific troubleshooting steps or call a technician.

Where can I find genuine replacement parts for the Kenmore Dryer 11066712694?

Authorized Sears parts distributors, the official Kenmore website, or trusted appliance parts retailers online are reliable sources for genuine replacement components.