Overview of Goof Off Pro Strength Remover SDS
The SDS for Goof Off Pro Strength Remover is a vital document that communicates the chemical and physical properties of the product, associated risks, and recommended safety precautions. It is mandated by regulatory agencies such as OSHA (Occupational Safety and Health Administration) to ensure that all users are well-informed about the potential hazards and proper handling techniques.
This SDS provides a structured format that includes sections on identification, hazard identification, composition, first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls, and more. It serves as a critical resource for workers, safety professionals, and emergency responders.
Product Composition and Chemical Properties
Ingredients
Goof Off Pro Strength Remover is formulated with potent solvents and additives designed to dissolve adhesives, paints, and other residues. Its primary chemical components typically include:
- Naphtha (Petroleum Distillate)
- Acetone
- Ethyl Acetate
- Methyl Ethyl Ketone (MEK)
- Other proprietary solvents and additives
Note: The exact formulation may vary depending on the manufacturer and product version. Always refer to the SDS for the specific product batch.
Physical and Chemical Properties
Understanding the physical and chemical attributes of the product is essential for safe handling:
- Appearance: Clear, colorless liquid
- Odor: Strong solvent smell
- Boiling Point: Approximately 56°C to 80°C (depending on specific components)
- Flash Point: -20°C to -10°C (indicative of high flammability)
- Vapor Pressure: High vapor pressure, which means significant vapor release at room temperature
- Solubility: Miscible with many organic solvents; insoluble in water
- Specific Gravity: 0.75 to 0.85 g/cm³
Hazard Identification
The SDS classifies Goof Off Pro Strength Remover as a hazardous chemical, primarily due to its flammability, health risks upon inhalation or skin contact, and environmental impact.
Classification
- Flammable Liquids: Category 2
- Aspiration Hazard: Category 1
- Skin Corrosion/Irritation: Category 2
- Serious Eye Damage/Eye Irritation: Category 2A
- Specific Target Organ Toxicity: Single exposure (respiratory system, central nervous system)
Hazard Symbols
- Flammable
- Health hazard
- Exclamation mark
- Environment (depending on jurisdiction)
Precautionary Statements
- Keep away from heat, sparks, open flames, and hot surfaces.
- Avoid breathing vapors or mists.
- Use personal protective equipment.
- Do not ingest or allow contact with skin and eyes.
- Store in a well-ventilated area.
Safety Data: Handling and Storage
Proper handling and storage are critical to minimize risks associated with Goof Off Pro Strength Remover.
Handling Procedures
- Use in well-ventilated areas, preferably with local exhaust ventilation.
- Wear appropriate PPE including gloves, goggles, and respirators if necessary.
- Avoid inhalation of vapors; do not smoke or create sparks during use.
- Do not eat, drink, or smoke while handling the product.
- Wash hands thoroughly after use.
Storage Recommendations
- Store in a cool, dry, well-ventilated place away from heat sources.
- Keep container tightly closed when not in use.
- Store away from incompatible materials such as oxidizers.
- Use approved containers made of compatible materials (e.g., metal or certain plastics).
Exposure Controls and Personal Protective Equipment (PPE)
Given the volatile and hazardous nature of the product, exposure controls are necessary to protect users.
Exposure Limits
- OSHA PEL (Permissible Exposure Limit) for solvents like acetone: 1,000 ppm (8-hour TWA)
- NIOSH REL (Recommended Exposure Limit): 250 ppm for acetone
Engineering Controls
- Use local exhaust ventilation to reduce vapor concentration.
- Ensure good general ventilation in the workspace.
- Use enclosed systems where feasible.
PPE Recommendations
- Gloves: Nitrile or neoprene gloves resistant to solvents
- Eye Protection: Safety goggles or face shield
- Respiratory Protection: Organic vapor cartridge respirator if ventilation is inadequate
- Clothing: Long sleeves and protective clothing to prevent skin contact
Firefighting Measures
Due to its high flammability, special precautions are necessary when dealing with fire hazards.
Suitable Extinguishing Media
- Foam, dry chemical powder, or carbon dioxide (CO₂)
Unsuitable Extinguishing Media
- Water jets (may spread the fire)
Firefighting Procedures
- Wear full protective gear and a self-contained breathing apparatus.
- Eliminate ignition sources before approaching the fire.
- Use foam or dry chemical extinguishers to suppress flames.
- Cool containers with water to prevent rupture or explosion.
Hazardous Combustion Products
- Carbon monoxide
- Carbon dioxide
- Unburned hydrocarbons
Accidental Release Measures
In the event of a spill or leak, prompt and appropriate action is necessary.
Personal Precautions
- Evacuate personnel from the spill area.
- Use PPE including gloves and respirators.
- Avoid inhaling vapors and skin contact.
Environmental Precautions
- Prevent the product from entering drains, water bodies, or soil.
- Contain the spill using inert absorbent materials such as sand or vermiculite.
Cleanup Procedures
- Collect spilled material into suitable containers.
- Use non-sparking tools for cleanup.
- Dispose of waste in accordance with local regulations.
Disposal Considerations
Proper disposal of residual product and contaminated materials is essential for environmental protection.
- Follow federal, state, and local regulations.
- Do not pour down drains or sewers.
- Use licensed hazardous waste disposal services.
- Label waste containers clearly as containing solvent residues.
Health Hazards and First Aid Measures
Understanding how to respond to accidental exposure is vital for safety.
Inhalation
- Move individual to fresh air immediately.
- If breathing is difficult, seek medical attention.
- Administer oxygen if trained personnel are available.
Skin Contact
- Remove contaminated clothing.
- Wash affected area thoroughly with soap and water.
- Seek medical attention for persistent irritation.
Eye Contact
- Rinse immediately with plenty of water for at least 15 minutes.
- Remove contact lenses if present.
- Seek emergency medical care.
Ingestion
- Do not induce vomiting.
- Rinse mouth with water.
- Seek urgent medical attention.
Environmental Impact and Precautions
The solvents in Goof Off Pro Strength Remover can have adverse effects on aquatic life and the environment.
- Prevent runoff into waterways.
- Use minimal quantities necessary.
- Employ spill containment measures.
- Follow local environmental regulations for disposal.
Regulatory Information and Safety Recommendations
Compliance with regulations such as OSHA, EPA, and local laws ensures safe use and disposal.
- Maintain SDS accessible in work areas.
- Train employees on proper handling procedures.
- Use appropriate signage and labels.
- Regularly review safety protocols and update as needed.
Conclusion
The Goof Off Pro Strength Remover SDS provides detailed guidance on the safe use, handling, and disposal of this potent solvent-based product. Its comprehensive safety instructions aim to protect users, emergency responders, and the environment from potential hazards such as flammability, inhalation risks, skin and eye irritation, and environmental contamination. By adhering to the SDS's recommendations, users can maximize the effectiveness of the product while minimizing associated risks. Always ensure to review the latest SDS version before handling the product and stay informed about applicable safety standards and regulations. Proper safety measures, awareness, and responsible disposal practices are essential components of working safely with Goof Off Pro Strength Remover.
Frequently Asked Questions
What is the primary use of Goof Off Pro Strength Remover SDS?
The SDS (Safety Data Sheet) details the product's safe handling, hazards, and first aid measures for removing adhesives, paint, and stains effectively.
Are there any specific safety precautions listed in the SDS for Goof Off Pro Strength Remover?
Yes, the SDS recommends wearing protective gloves, goggles, and ensuring proper ventilation to minimize inhalation or skin contact with the chemical.
What are the potential hazards associated with Goof Off Pro Strength Remover according to the SDS?
The SDS indicates that the product is flammable, may cause skin and eye irritation, and inhalation of vapors can be harmful.
How should I store Goof Off Pro Strength Remover safely as per the SDS?
The SDS advises storing the product in a cool, well-ventilated area away from heat sources, open flames, and incompatible materials.
What first aid measures are recommended in the SDS if someone is exposed to Goof Off Pro Strength Remover?
The SDS recommends rinsing affected skin or eyes with water, removing contaminated clothing, and seeking medical attention if symptoms persist.
Is there any environmental impact information in the SDS for Goof Off Pro Strength Remover?
Yes, the SDS warns against releasing the product into the environment, as it can be harmful to aquatic life and recommends proper disposal methods.
Where can I obtain the full SDS for Goof Off Pro Strength Remover?
The full SDS can typically be downloaded from the manufacturer's website or requested directly from the supplier or distributor.
