Overview of Kenmore Refrigerator Model 795
The Kenmore Refrigerator Model 795 series is renowned for its durability, innovative features, and sleek design. Typically, these models feature a side-by-side configuration, providing ample storage space for fresh and frozen foods. As with any high-end appliance, regular maintenance and timely replacement of worn or damaged parts are essential for optimal performance. Understanding the key components and their roles can help you troubleshoot issues effectively.
Key Parts of Kenmore Refrigerator Model 795
The functioning of your Kenmore refrigerator relies on multiple interconnected parts. Below is a detailed overview of the most vital components, categorized by their primary functions.
Cooling System Components
Proper cooling is fundamental to preserving your food, and several parts contribute to maintaining the optimal temperature.
- Compressor: The compressor is the heart of the refrigeration cycle, compressing refrigerant gas and circulating it through the system. If the compressor fails, the entire cooling system may malfunction.
- Condenser Coils: Located at the back or underneath the refrigerator, condenser coils dissipate heat from the refrigerant. Dirty or damaged coils can reduce efficiency and cause overheating.
- Evaporator Fan Motor: This fan circulates air over the evaporator coils within the freezer and refrigerator compartments, ensuring even cooling.
- Thermostat: The thermostat monitors the internal temperature and signals the compressor to turn on or off to maintain desired settings.
Refrigeration and Freezing Parts
These parts work together to keep your food cold and frozen.
- Refrigerator & Freezer Door Gaskets: Seals that prevent warm air from entering, maintaining the internal temperature.
- Ice Maker Assembly: Includes the ice mold, ejector arm, and water inlet valve, responsible for producing ice cubes.
- Water Inlet Valve: Controls the flow of water into the ice maker and water dispenser.
- Defrost Heater: Melts ice buildup on the evaporator coils to prevent frost accumulation.
Water Dispensing System Parts
Many Kenmore Model 795 units come equipped with a water dispenser; its parts include:
- Dispenser Actuator: The button or lever that activates water flow.
- Water Filter: Purifies water before dispensing, improving taste and safety.
- Door Water Inlet Valve: Allows water to flow into the dispenser when activated.
Interior Storage and Organization Parts
Maintaining organization inside your refrigerator is made easier with various parts.
- Shelves and Bins: Adjustable glass shelves and door bins for versatile storage.
- Crisper Drawers: Humidity-controlled drawers for fruits and vegetables.
- Door Shelf Baskets: Compartments designed for bottles, condiments, and small items.
Common Replacement Parts for Kenmore Refrigerator Model 795
If your refrigerator isn't functioning properly, replacing specific parts can often resolve the issue. Below are some of the most commonly needed replacement parts for this model.
Refrigerator and Freezer Components
- Compressor: Replacement is more complex and may require professional installation.
- Condenser Coils: Easy to clean or replace if damaged or corroded.
- Evaporator Fan Motor: Ensures proper airflow; replace if noisy or malfunctioning.
- Thermostat: Replaces faulty temperature regulation.
Water and Ice System Parts
- Ice Maker Kit: Complete assemblies available for quick replacement.
- Water Inlet Valve: Prevents leaks and ensures proper water flow.
- Water Filter: Regularly replaced to maintain water quality.
- Defrost Heater: Keeps frost buildup under control, essential during defrost cycles.
Door and Interior Parts
- Door Gaskets: Ensures an airtight seal to improve efficiency.
- Shelves and Bins: Replaced for broken or damaged storage options.
- Dispenser Actuator: Restores water dispensing functionality.
Where to Find Parts for Kenmore Refrigerator Model 795
Knowing where to source quality parts is crucial for maintenance and repairs. Here are some options:
Authorized Service Centers
Authorized Kenmore or Sears service centers provide genuine parts, ensuring compatibility and durability. Visiting these centers guarantees that you receive parts tested for your specific model.
Online Retailers and Part Suppliers
Numerous reputable online stores offer a wide selection of replacement parts for Kenmore refrigerators, including:
- Kenmore's official website
- PartSelect
- RepairClinic
- AppliancePartsPros
- Amazon
When purchasing online, always verify the part number and compatibility with your model (Kenmore Model 795).
Local Appliance Parts Stores
Many cities have local stores specializing in appliance parts. Staff can help identify the correct component based on your refrigerator's model and issue.
Tips for Maintaining and Replacing Parts
Proper maintenance can extend the lifespan of your Kenmore refrigerator and prevent frequent repairs.
- Regularly clean condenser coils to maintain efficiency.
- Replace water filters every six months or as recommended.
- Inspect door gaskets for cracks or tears and replace if necessary.
- Monitor the operation of the ice maker and water dispenser for leaks or clogs.
- Follow manufacturer instructions for safe replacement of electrical components like thermostats and fans.
Conclusion
Ensuring your Kenmore Refrigerator Model 795 functions optimally requires an understanding of its various parts and their roles. From the cooling system components like the compressor and condenser coils to the water inlet valve and ice maker assembly, each part plays a vital role in maintaining the appliance's performance. When issues arise, identifying the faulty component and replacing it with genuine parts can restore your refrigerator's efficiency and extend its lifespan. Always prioritize safety and consult professional technicians for complex repairs, especially those involving electrical or refrigerant systems. With proper care and timely replacements, your Kenmore refrigerator can continue serving your household reliably for years to come.
Frequently Asked Questions
What are the most common replacement parts for the Kenmore Refrigerator Model 795?
Common replacement parts include the ice maker assembly, water inlet valve, defrost timer, door seals, and evaporator fan motor.
Where can I find compatible parts for my Kenmore Refrigerator Model 795?
Compatible parts can be purchased from authorized Kenmore retailers, appliance parts stores, or online marketplaces like Sears PartsDirect and AppliancePartsPros.
How do I troubleshoot if my Kenmore Model 795 refrigerator isn't cooling properly?
Start by checking the condenser coils, ensuring the door seals are tight, and inspecting the evaporator fan. Replacing faulty parts like the temperature control board or defrost thermostat may be necessary.
Are there any specific parts for the ice maker in Kenmore Refrigerator Model 795?
Yes, parts such as the ice maker kit, ice mold thermostat, and ice ejector arm are available for replacement if your ice maker is malfunctioning.
Can I replace the door seals on my Kenmore Refrigerator Model 795 myself?
Yes, replacing door seals is generally straightforward and can be done with basic tools. Ensure you purchase the correct seals for your model for a proper fit.
What should I do if my Kenmore Model 795 refrigerator is making loud noises?
Loud noises may be caused by faulty evaporator or condenser fans, or a failing compressor. Inspect these parts and replace any that are damaged or worn out.
Is it necessary to use original parts for repairs on Kenmore Refrigerator Model 795?
Using original or manufacturer-approved parts ensures compatibility and optimal performance, reducing the risk of further damage.
How can I identify the correct part number for parts for my Kenmore Model 795?
Check the model and serial number label inside the refrigerator, then refer to the parts list on Sears PartsDirect or contact customer support for assistance.
What is the average cost of replacing parts for a Kenmore Refrigerator Model 795?
Costs vary depending on the part, but typical replacements like water inlet valves or fan motors range from $50 to $150, excluding labor if you hire a technician.
